General Type CO2 laser power Supply 220V for 40W to 80W Laser Tube 50W, 60W

Description

The best price for the best products.
COLE Co,.Ltd offers faster and better services with less price!
General Type CO2 laser power Supply 220V for 40W to 80W Laser Tube 50W, 60W
Brand New, High Quality and Extra Long Life.
General Type Industrial CO2 laser power supply 220V for 40W-80W (length within 1650mm) CO2 laser tube
Including high voltage connector (value US)
Two years warranty
1.Feature
General model and good compatibility: it can adapt to the various manufacturers of 30W-80W (overall length ≤1650mm) laser tube; can also be achieved in a variety of brand laser equipment on the power replacement.
Widely application range from 30-80W, if you want to upgrade the power of laser within 80W, don’t need change the new power supply.
This product uses PWM high-voltage high-frequency switching mode and voltage/current double closed-loop control mode.
This product possess wide output range with excellent constant-current matching effect, excellent current linearity , can improve the life cycle and overall performance of the laser.
This product uses microprocessor-based digital control chip technology, to have high control accuracy, high integration of electronic components, good stability.
This product possesses low temperature rise and high efficiency.
The structure of the power supply is simple and reliable, with good shock resistance and dust, chemical, moisture resistance and other functions.
The power supply cost-effective is better than all the other power supplies in current market, and warranty period is two years.Please find the following photos of the power supply interior.
This product possesses wide range of applications: sculpture, cutting, drilling, carving, craft production and so on.
2.Parameter
Input: input voltage AC 220V ±15% Frequency 50Hz
Output: light-up voltage 25KV~50KV
Nominal working voltage 18KV
Current regulation range: 0~38mA
Response speed: ≤1ms (the time from the moment the switch signal is given to the moment the output current has risen to 90% of the specified current)
Switch control: input 5V, TTL level
Working temperature: -10~45°C
Storage temperature: -25~75°C
Relative humidity: 90%RH maximally (noncondensing state)
Insulation strength: input to ground AC1500V, no flashover within 1 minute
Overall dimensions: 30*20*10(H)cm
Cooling method: forced air cooling (cooling by ventilator)
Weight: 4.3kg
3. Interface Description
2EDG5.08-6P control interface：
①
②
③
④
⑤
⑥
TTL+
TTL-
WP
GND
PwrCtrl
VCC
Pin① TTL+ is the high level control light producing signal (a switch can be connected between the PIN⑥ and PIN① to control the light producing)
Pin② TTL- is the low level control light producing signal ((a switch can be connected between the PIN ④ and PIN② to control the light producing)
Pin③ WP is the water protection, and if a water protection switch is connected between PIN③ and PIN④, it will work normally at low level voltage and protect the power supply at the high level. During the test of the power supply, PIN③ can be short circuited to PIN④.
Pin④ is ground.
Pin⑤ is the energy control signal, and when regulating the power with the potentiometer, the regulating end of the potentiometer will be connected to PIN⑤, with the remaining two ends connected to 5V and ground respectively (PIN④ and PIN⑥).
Pin⑥ is a 5V power supply, which can be used during high level control as well as the power regulation via potentiometer, whose current is less than 10mA.
DB9 control interface:
⑤
GND
④
PwrCtrl
③
VCC
②
WP
①
NC
⑨
NC
⑧
+12V
⑦
NC
⑥
TTL-
Pins ①, ⑦, ⑨ are null.
Pin ② is the water protection pin, and if a water protection switch is connected between PIN② and PIN⑤, it will work normally at low level voltage and protect the power supply at the high level. During the test of the power supply, PIN② can be short circuited to PIN⑤.
Pin③ is 5V power supply, and the output current is less than 10mA.
Pin④ is the energy control signal. Input 0~3.3V analog level from the outside to regulate the output laser power.
Pin⑤ is ground.
Pin⑥ TTL- is the low level control light producing signal ((a switch can be connected between the PIN⑥ and PIN⑤ to control the light producing).
Pin⑧ is 12V power supply. Its output current is less than 20mA.
Voltage input interface:
FG(⊥)
AC(L)
AC(N)
Chassis ground
AC220V 50Hz
Pin FG(⊥) is chassis ground, which can be reliably connected to ground in the equipment.
Pin AC(L) and pin AC(N) are power supply input, which are connected to 220V 50Hz
4. Packing List:
CO2 power supply x1
High voltage connector x1
Warranty & Return Policy:
30 days Satisfaction Guarantee. Returns accepted whine 30 days.
Return must in original package and not been used.
Buyer is responsible for shipping the Item to us.
We provide technology support by E-mail and online support.
Shipping:
All items in stock. we post the items within 24 hour once we receive the payment, including weekend.
Express door to door service take only about 3-5 working days to USA, UK, Germany,France ,Spain, Asia, West Europe and Australia.
Note:
We value every customer.
We leave positive feedback when payment clears and very appreciate you give us positive feedback .
If you are not satisfied with a transaction, please contact us and allow us to resolve it before leaving feedback.
Special requirement
, please put down a note when payment.